Air that moves the way it should.
Ventilation designed as a system: fresh air in, stale and humid air out, balanced across the building and filtered on the way through.
Modern buildings are built tight, which is good for energy and hard on air quality. Without deliberate ventilation, moisture, cooking by-products, odours and contaminants stay in the space. Mechanical ventilation replaces that air on purpose, at a measured rate.
We design balanced systems — heat and energy recovery ventilators, exhaust, make-up air and filtration — and commission them so the measured airflow matches the design intent rather than the equipment nameplate.
What a properly engineered system delivers
Better indoor air
Continuous, filtered fresh air dilutes contaminants instead of trapping them indoors.
Moisture management
Balanced exhaust and supply keep humidity in a healthy range and protect building assemblies.
Energy recovery
Recovery ventilators temper incoming air with air already conditioned on the way out.
Verified airflow
Systems are balanced and measured, so what was designed is what actually moves.
- HRV and ERV installation and replacement
- Kitchen, bath and utility exhaust
- Make-up air for high-capacity range hoods
- Filtration and air-quality upgrades
- Commercial ventilation and exhaust systems
- Air balancing and duct system remediation
Assessment
We review the building, the existing system and how the space is used, then confirm what the project actually requires.
Design
Loads are calculated and equipment, distribution, zoning and controls are selected to match the building.
Installation
Work is executed to the drawing with clean routing, correct clearances and coordination with other trades.
Commissioning
The system is started, measured and adjusted, and we walk you through operation and maintenance.
Frequently asked
What is the difference between an HRV and an ERV?+
Both recover heat from outgoing air. An ERV also transfers a portion of moisture, which can help in climates and buildings where humidity swings matter.
Does a powerful range hood need make-up air?+
In a tight house, usually yes. Without it, a large hood can depressurize the building and interfere with combustion appliances.
Can ventilation be added to an existing home?+
Yes. Routing is the main constraint, and we plan it around the finished spaces.
Let's build your comfort system.
Tell us about your project — new build, renovation, replacement or service — and we'll take it from there.